The Carmel (MAXREFDES18#) subsystem reference design provides a high-accuracy analog current/voltage output in a compact, galvanically isolated form factor. This design uniquely fits programmable logic controllers (PLC), distributed control systems (DCS), and other industrial applications . Hardware and firmware design files and lab measurements are provided for rapid prototyping and development. The board is also available for purchase.
There are currently more than 30 industry standards for Industrial Ethernet in the field of industrial automation. Some mature real-time Ethernet protocols such as EtherCAT, EtherNet/IP, PROFINET, Sercos III, and PowerLink require specialized MAC hardware support for FPGAs or ASICs. The Programmable Real-Time Unit within the Industrial Communication Subsystem (PRU-ICSS) exists as a hardware module of the Sitara processor family and will replace FPGAs or ASICs with a single chip solution. Firmware in PRU-ICSS can be used to detect the type of Industrial Ethernet protocol and load the corresponding industrial application into the Sitara processor during runtime. This TI Design introduces PRU-ICSS's multi-protocol Industrial Ethernet protocol detection firmware.
TIDM-ULTRASONIC-FLOW-TDC is a reference design for an ultrasonic flow meter (water, gas or heat meter) with LCD, using a time-to-digital converter and an ultra-low power MCU. The solution includes optimized leak detection, low power consumption and small form factor, which are important requirements for water, heat and gas meter applications. The design also includes a high-efficiency DC-DC converter for system power supply.
Using the wearable sensor function of SensorTile.box, you can intuitively observe your movements and training conditions through curves when doing push-ups and planks.
The MAXREFDES1180 is centered around the MAX17501 ultra small, high-efficiency, high-voltage, synchronous stepdown DC-DC converter with integrated MOSFETs. This design provides a -12V output and up to 150mA of load current with an input voltage range of 4.5V to 5.5V. Unlike a traditional design, this reference design is configured to work in an inverting buck-boost topology to produce negative output voltage from positive input voltage.
SYZYGY is an FPGA extension standard for medium to high speed interfaces. This design is a splitter for 4x PMOD connectors. All 32 I/O signals from the SYZYGY connector are brought out. 8 on each PMOD.
The PMP20634 reference design is an isolated DCM flyback design that provides a universal AC line input from 85V to 265V and produces a 12V output capable of handling a 12W load. The design uses the UCC28730 controller to achieve ultra-low standby power at no load. It achieves 85% efficiency in high and low voltage lines and measures 1 x 3 inches on a 2-layer circuit board.
This reference design is a low standby and transport mode current consumption, high SOC metering accuracy, 13S, 48V Li-ion battery pack design. It monitors each cell voltage, battery pack current and temperature with high precision and protects lithium-ion battery packs from overvoltage, undervoltage, overheating and overcurrent. SOC metrology based on the bq34z100-g1 utilizes an impedance tracking algorithm to achieve up to 2% accuracy at room temperature. Utilizing a carefully designed auxiliary power strategy and the efficient low quiescent current DC/DC converter LM5164, this design achieves 50µA standby power and 5µA transport mode power, thereby saving more energy and extending transport and idle times. In addition, the design supports working firmware, which helps reduce product development time.
This "RF Layout Reference Design" demonstrates excellent decoupling and layout techniques for low power RF devices in the 868 MHz and 915 MHz bands.
Power over Ethernet (PoE) is a technology that allows network cables to deliver power to a powered device (PD) via power-sourcing equipment (PSE) or midspan, and has many advantages over traditional methods of delivering power. The MAXREFDES1149 reference design is a 36V~57V input to 12V/1A output flyback PoE PD power module to be used in Ethernet equipment that needs the 12V power supply to be isolated from the primary Ethernet power.
TIDA-00891 is designed to evaluate the HD3SS3220 device for UFP implementation. This reference design also serves as a hardware reference design for any implementation using the HD3SS3220 with a USB-C™ connector. Reference design files are available upon request to assist in PCB design using the HD3SS3220. This design provides layout files to guide you through the routing/location rules schematic to implement the TUSB321A. This reference design provides an onboard USB Type-A plug to connect to legacy USB systems. Please note that this reference design may contain test components that are intended for evaluation and are not suitable for production.
The TIDA-00821 reference design is a stackable monitor and protector for use in large lithium-ion batteries that provides monitoring, balancing and communication functions. Each bq76PL536A-Q1 EVM can manage 3 to 6 cells in Li-ion battery applications. Up to 32 bq76PL536A-Q1 EVM modules can be stacked. The system provides fast cell balancing, diagnostic capabilities, and module-to-controller communication. In addition, an independent
protection circuit is integrated.
The MAXREFDES1043 is designed for SpO2 measurements based on Maxim’s new-generation biosensor—the MAX30102.
Digital MEMS microphone expansion board based on MP34DT06J for STM32 Nucleo
LSM330D adapter board for standard DIL24 socket
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
