The USB Type-C™ and Power Delivery (PD) MicroDock Evaluation Module (EVM) provides a complete USB Type-C dock reference solution including audio, USB data, power delivery and video. The EVM has a small 2-inch × 4-inch form factor and supports both sourcing and sinking power capabilities through the USB Type-C PD host port. Video output capabilities include DisplayPort and HDMI.
This advanced motor implements closed-loop speed control to maintain precise RPM across load torque profiles. The DRV5013 Hall-effect sensor senses the magnetic rotor position, and the DRV8308 controller determines when to drive the CSD88537ND FET that energizes the coil . Without the use of a microcontroller or firmware, the sinusoidal current minimizes noise and torque ripple, maximizing motor performance.
This article demonstrates how to achieve current limit for the MAX1692 PWM step-down regulator by using a MAX4173H current-sense amplifier.
This shunt-based, isolated current measurement unit enables high-precision current measurement without the use of current transformers (CTs). Isolation is achieved through the AMC1304 which integrates high voltage isolation and a Delta-Sigma modulator . This solution avoids the need to use CTs, which is highly valued by customers as it reduces board size, product weight, crosstalk and EMI in the system, and reduces mechanical requirements by replacing CTs with shunts. problems, potentially extending product life.
NXP's FXPQ3115BV biomedical precision pressure sensor ecosystem includes demonstration kits, sensor shield development boards and breakout boards.
TIDA-01234 is a 24W high efficiency (94%) low-cost asynchronous boost reference design for automotive LED applications based on LM3481-Q1.
This reference design is suitable for automotive high-intensity lighting systems such as headlights and taillights, as well as interior LED lighting systems. It is designed to operate over an input voltage range of 6V to 18V and is capable of driving multiple strings of 6 to 7 LEDs in series (16V to 24V) at a constant current of 1A. This reference design supports analog LED brightness control and output open circuit protection. In a boost-to-battery configuration, the input voltage can be above, below, or equal to the desired LED string voltage.
Learn about the sensor toolbox development tools for FXLS8471Q 3-axis linear accelerometer. Demo kits, shield and breakout boards with compatible SW
The KITFS6523 evaluation board demonstrates the capabilities of the FS65xx and FS45xx product families. These safety SBCs target the ISO26262 automotive functional safety standard.
This reference design explains how to power the Xilinx Zynq Extensible Processing Platform (EPP) and peripheral ICs using Maxim's power-supply solutions.
This reference design features TI's DLP2010 (.2 WVGA) DMD chipset and is designed to enable ultra-low power and ultra-mobile displays either embedded into systems (e.g. smartphones, tablets, etc.) or as a standalone add-on module application. This chipset is used in designs containing the DLP2010 (.2 WVGA) DMD, DPC3435 display control, and DLPA2005 PMIC/LED driver.
Maxim health sensor (hSensor) platform helps customers evaluate Maxim's complex and innovative medical and high-end fitness solutions faster and easier. The hSensor platform supports the measurement of motion, precision skin temperature, biopotential measurements, and reflective photo plethysmography measurements, etc.
This application note presents a simple, cost-effective, pre-IEEE® 802.3at PoE+ Powered Decice (PD) solution that employs the MAX5941B. The preliminary requirements of PoE+ PDs are discussed, as is the advantage of extending the existing MAX5941B circuit to implement a PoE+ PD. Test results including inrush-current limit, efficiency, output ripple, and dynamic response are presented for a 3.3V, 30W PD.
This application note describes a two-phase, synchronous, step-down converter that is fully compliant with the AMD® K8 Low-Power Mobile Specification. It includes details of the circuit operation, schematic, bill of materials, and a 1.2 volt, 27.3 Amp reference design with test data.
Brushed motors are a relatively popular motor design option due to their low price and simple control scheme. A brushed motor has a wound rotor and a permanent magnet stator. The motor is commutated via a conductive ring: this ring is connected to the rotor, which uses a brush to scrape against the commutator ring, thus commutation is achieved. Therefore, the direction of current flowing through the motor can change depending on the brush orientation and different commutation rings. Simple direction changes and speed control changes can be quickly and efficiently implemented on brushed DC motors using an H-bridge. An electronic driver is required to control the motor current in a brushed DC motor. The electronic drive circuit contains a power stage with a two-phase inverter (to meet the required power intensity), a microcontroller for implementing motor speed commands and fault handling, a current sensing function for motor start/stop protection, for control Gate drivers for two-phase inverters and power supplies for microcontrollers and other low-voltage devices.
TIDM-CAPTIVATE-64-BUTTON TI reference design demonstrates an ultra-low power touch panel with 64 buttons that can be controlled from a single MSP microcontroller (MCU) with CapTIvate™ technology. The design uses mutual capacitance technology to ensure that all 64 buttons are tightly packed and can be controlled with just 16 MCU pins. This touch panel easily connects to the CAPTIVATE-FR2633 MCU target module included in the MSP-CAPT-FR2633 MCU development kit.
This TEA1836 board demonstrates an ultra-compact, high power density, and cost-effective 45 W / 19.5 VAC/DC switch mode power supply (SMPS) wall adapter, typically used for ultrabook and tablet likely applications.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
