OM13584: PTN5150A-PTN36043 USB Type-C CC Logic Evaluation Kit

Evaluate USB Type-C CC control logic in DFP and UFP (or DRP) configurations. Also included is the PTN36043 USB3.0 SuperSpeed ​​redriver.

Schematic PCB

OM13790 Host and Dock: USB Type-C Shield Board Gen 2 with DisplayPort Alt Mode

NXP is launching a Generation 2 USB Type-C Shield with display port alt mode support! The NXP Generation 2 USB Type-C shield works with the MCUXpresso SDK and USB Power Delivery stack to allow you to connect USB Type-C Connectors to select Kinetis®, LPC and i.MX RT development platforms.

Schematic PCB

PTN3816EVM: DisplayPort Linear Redriver Evaluation Board for the PNT3816

KIT-TPLSNIFEVB: Transformer Physical Layer (TPL) sniffer tool

SJA1110 100Base-T1 Multi-Gigabit Ethernet Switch Example Board

Schematic PCB

P3A9606JK-EVB: 2-channel converter evaluation board

SJA1105Q-EVB: Ethernet switch and PHY evaluation board.

The SJA1105Q-EVB is an evaluation board for the SJA1105P/Q/R/S Automotive Ethernet switchs series and TJA1102 dual 100BASE-T1 PHY.

TJA1100HN 100BASE-T1 Automotive Ethernet PHY - Customer Evaluation Board

The OM14500/TJA1100 is designed for rapid evaluation of the TJA1100HN PHY. It has direct access to MDI and MII/RMII interfaces and chip configuration bits

Schematic PCB

OM14510-SJA1105TJP: Automotive Ethernet switch application board

OM14510/SJA1105TJP is an application board used to evaluate SJA1105EL and SJA1105TEL

Schematic PCB

SJA1105Q-EVB: Ethernet switch and PHY evaluation board.

OM13587: PTN5110 Type-C Demonstration Kit

The PTN5110 Type-C demo kit shows a fully functional USB PD connection between DFP and UFP. The motherboard and docking board can also be ordered separately.

Schematic PCB

RDDRONE-T1ADAPT: Ethernet media converter for drones, rovers, mobile robots and cars

OM13529UL: PCAL6524/(EV-VFBGA36)(S500)Fm+ I2C 24-bit GPIO Demonstration Board

ADTJA1101-RMII: TJA1101 Automotive Ethernet Adapter for S32K148EVB and i.MX8

OM6270: SPI/I ² C to UART Bridge Demonstration Board (SC16IS750)

OM6270 is a demonstration board for SC16IS750. SC16IS740/750/760 is a slave I ² C bus/SPI interface that connects to a single-channel high-performance UART .

OM13790 Host & Dock: USB Type-C Shield Board Gen 2 with Display Port Alt Mode

The NXP Gen 2 USB Type-C shield works with the MCUXpresso SDK and USB power delivery stack, giving you access to your choice of Kinetis®, LPC and i.MX RT development platforms via the USB Type-C connector. And it uses NXP’s easy-to-use hardware and MCUXpresso software and tools (the only similar solution on the market) to shorten the learning curve. It enables Type-C to seamlessly support Display Port alt mode and provides extensive overvoltage protection services for a simple and efficient design.

OM13317: NVT2001GM demonstration board

The NVT2008PW (OM13317) and NVT2010PW (OM13324) demonstration boards are designed to allow customers to evaluate NXP's 8- or 10-channel bidirectional voltage level translators.

SJA1124EVB: Evaluation board for the SJA1124 SPI to Quad-LIN bridge

The SJA1124EVB is an evaluation board for the SJA1124 SPI to QuadLIN bridge that supports up to 16 LIN master channel connections when plugged into a microcontroller board.

Schematic PCB

OM14500-TJA1101: Automotive Ethernet 100BASE-T1 PHY Customer Evaluation Board

OM14500/TJA1101 is designed for rapid evaluation of the TJA1101 Phy. It has direct access to MDI and MII/RMII interfaces and chip configuration bits

OM13541: PCAL6534 Evaluation Board

OM13541UL is designed to evaluate the NXP PCAL6534. The PCAL6534 is a 34-bit general-purpose I/O expander that provides remote I/O expansion for most microcontroller families via the Fast Mode (Fm+) I²C-bus interface. The ultra-low voltage interface allows direct connection to microcontrollers operating with voltages as low as 0.8 V.