The analyzer host computer directly uses Wireshark. The hardware is implemented using Cypress CY7C68013A MCU + Lattice LCMXO2 FPGA + Microchip USB3343 USB PHY
Many industrial and medical applications require temperature measurements with accuracies of ±1°C or better, performed with reasonable cost over a wide range of temperatures (-270°C to +1750°C), and often with low power consumption. Properly selected, Standardized, modern thermocouples paired with high-resolution ADC data acquisition systems (DASs) can cover this wide temperature range and ensure reproducible measurements, even in the harshest industrial environments.
CANable 2.0 is a small, low-cost, open-source USB to CAN adapter. CANable enumerates as a virtual serial port on your computer and acts as a serial line to CAN bus interface. Using the alternative candleLight firmware, CANable enumerates as a native CAN interface on Linux. CANable 2.0 supports standard CAN and CAN-FD.
The CANable adapter is compatible with ARM-based embedded platforms such as Raspberry Pi, Raspberry Pi Zero, ODROID, BeagleBone, etc., making it ideal for integration into OEM products.
The SJA1124EVB is an evaluation board for the SJA1124 SPI to QuadLIN bridge that supports up to 16 LIN master channel connections when plugged into a microcontroller board.
The MAXREFDES61# reference design ushers in the era of Industry 4.0. With a complete analog front-end for the next generation of ultra-small programmable logic controllers, this design meets the higher resolution and higher voltage needs of industrial control and industrial automation applications, while consuming minimal power and space. This high-performance system features four channels of analog input, a complete, efficient power-supply system and on-board processing. Hardware and firmware design files as well as FFTs and histograms from lab measurements are provided.
New Analog/Analog Isolator Using Isolated Σ-Δ Modulator, Isolated DC/DC Converter and Active Filter
OM14500/TJA1101 is designed for rapid evaluation of the TJA1101 Phy. It has direct access to MDI and MII/RMII interfaces and chip configuration bits
Multifunctional mini computer (SD, wifi, OLED) design source code and related test programs
OM13541UL is designed to evaluate the NXP PCAL6534. The PCAL6534 is a 34-bit general-purpose I/O expander that provides remote I/O expansion for most microcontroller families via the Fast Mode (Fm+) I²C-bus interface. The ultra-low voltage interface allows direct connection to microcontrollers operating with voltages as low as 0.8 V.
A programmable resistor is an electronic device whose resistance can be adjusted, usually through a digital signal. Programmable resistors come in the form of integrated circuits (often called digital potentiometers) as well as stand-alone devices/expansion cards. There are many different applications, each with its own set of requirements.
Range 1Ω - 999.999KΩ.
By CNC engraving a PCB in the following manner, the curved pad can perform capacitive sensing in 3 different directions and ultimately detect the 3D position of the finger.
This reference design describes a cost-effective, low-power liquid-level measurement data acquisition system (DAS) that use a compensated silicon pressure sensor and a high-precision delta-sigma ADC. The document explains how to implement a design that measures and distributes most industrial liquids using a noncontact measurement approach. It also suggests system algorithms, provides noise analysis, and describes calibration ideas to improve system performance while reducing complexity and cost.
This reference design shows how to create a battery-powered electronic smart lock using integrated Wi-Fi®. This design shows how the SimpleLink™ Wi-Fi CC3220S wireless MCU (SoC) can be used as the main system controller and network processor to create a highly integrated design. The TIDC-01005 reference design combines the CC3220S and DRV8837 1.8A low voltage brushed DC motor driver to form the core of a Wi-Fi enabled electronic smart lock design. It also uses the SimpleLink low-power Bluetooth® CC2640R2F wireless MCU to demonstrate Wi-Fi configuration over BLE. The design utilizes the LaunchPad™ Development Kit and the DRV8837EVM, making reproduction and evaluation easy. The software used for TIDC-01005 is based on the SimpleLink SDK, enabling maximum portability within the SimpleLink platform.
Galvanically isolated, dual-channel, 16-bit, simultaneous sampling, daisy-chain data acquisition system
This design idea shows how you can design a simple wireless temperature-monitoring system with data-logging capabilities by using a local temperature sensor and an ASK transmitter and receiver pair.
The USB Type-C Shield expansion board for Kinetis Power Delivery SDK provides a Type-C connector for any Kinetis development platform.
This document explains how the Fresno (MAXREFDES11#) subsystem reference design meets the higher resolution and higher voltage needs of industrial control and industrial automation applications. Hardware and firmware design files as well as FFTs and histograms from lab measurements are provided.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
