Maxim's Santa Cruz (MAXREFDES23#) reference design is the world's smallest IO-Link® light sensor compliant with IEC 61131-9. The Santa Cruz has six different types of sensors: ambient light (clear), red, green, blue, infrared, and is also a temperature sensor. The entire design fits onto a 6.5mm x 25mm printed circuit board (PCB).
The MAXREFDES44# subsystem provides a 1-Wire-based reference design for securing a Xilinx system-on-chip (SoC) to protect IP and prevent attached peripheral counterfeiting. The system implements a Public/Private Key 1-Wire ECDSA challenge-response between the SoC and a DS28E35 secure authenticator with on board memory. Boards for purchase, hardware, and firmware design files provide complete system information for rapid prototyping and development.
Originally, video filters were passive LC circuits surrounded by amplifiers. Smaller, more efficient designs can currently be achieved by combining the amplifier with an RC filter. Sensitivity analysis and predistortion methods developed in the 1960s have, moreover, overcome the poor performance that gave early video filters a bad reputation.
Use the Android cable to connect the voice chip and connect it to the computer. At this time, there is a removable disk on the computer, and then put the sound file into the removable disk... Materials used: Voice playback module Yabo 51 microcontroller (refer to this microcontroller The digital tube and the 8 free IO ports can be used) 3 10k resistors... Put the sound file into the voice chip and connect the data line and power line to the microcontroller. Use the keil tool to generate the hex file from the c program. And write it into the microcontroller...
Maxim Integrated's MAXREFDES37# reference design is a fully IO-Link ver1.1 compliant, four-channel servo driver using a TMG TE IO-Link device stack. The system contains an IO-Link device transceiver, a low-power RL78 processor, and efficient industrial step-down DC-DC converter. The MAXREFDES37# comes preprogrammed and ready to connect with any compliant IO-Link master such as the MAXREFDES79# IO-Link master with a simple-to-use graphical user interface (GUI) program. Design files including schematic, PCB, BOM, and IODD firmware files are available for download.
Maxim Integrated's MAXREFDES42# reference design is a low-power, IO-Link RTD temperature sensor compliant with IEC 61131-9. The system contains an RTD-to-digital converter, an IO-Link transceiver, an efficient step-down converter, and a display. The MAXREFDES42# comes preprogrammed and ready to connect with a version 1.1-compliant IO-Link master. Design files including the schematic, PCB, BOM, and firmware source code are available for download.
Maxim Integrated's MAXREFDES79# reference design is a fully compliant IO-Link version 1.1, 4-port IO-Link Master using a TEConcept software stack. The system contains four IO-Link master transceivers, a standard ARM® Cortex® M3 processor, and efficient industrial step-down DC-DC converters. The MAXREFDES79# comes preprogrammed and ready to connect with any compliant IO-Link device using a simple-to-use graphical user interface (GUI) program. Design files including schematic, PCB, BOM, GUI software, and compliance report are available for download.
The MAXREFDES43# subsystem provides an I2C-based reference design for securing Xilinx FPGAs to protect IP and prevent attached peripheral counterfeiting. The system implements an I2C SHA-256 challenge-response between the FPGA and a DS28C22 secure authenticator with on-board memory. Boards for purchase, hardware, and firmware design files provide complete system information for rapid prototyping and development.
This document describes a microcontroller-based 1-Wire® master interface for reliable operation of small, medium, and large 1-Wire networks. This is accomplished using careful impedance matching, intelligent (software-controlled) active pullup, and slew-rate control. Software flow charts are included to assist the user in generating the correct 1-Wire timing for reset pulse, presence detect, write one, write zero, and read time slots using any suitable microcontroller. Scope traces illustrate the timing performance of the driver as well as transmission line effects as they appear with long cables.
Isolated 4-Channel Thermocouple/RTD Temperature Measurement System with 0.5°C Accuracy
The Petaluma (MAXREFDES30#) subsystem reference design is a cost optimized, high-speed and high-accuracy analog measurement solution for three-phase power monitoring applications. Hardware, firmware, design files, and lab measurements provide complete system information for rapid prototyping and development.
The software part of this tool (including the host computer) is not open source, but the schematic diagram and PCB related files are.
The MAXREFDES62# reference design ushers in the era of Industry 4.0. With dual RS-485 communication channels for the next generation of ultra-small programmable logic controllers, this design meets the data rate and higher voltage needs of industrial control and industrial automation applications, while consuming minimal power and space. This high-performance system features one half-duplex RS-485 transceiver, one full-duplex RS-485 transceiver, a complete, efficient power-supply system and on-board processing. Hardware and firmware design files as well as results of lab measurements are provided.
SYZYGY is an FPGA extension standard for medium to high speed interfaces. This breakout connects the SerDes in the SYZYGY-TXR connector to the card edge to act as a PCIe x4 add-in card. This breakout is very simple and can be made into a shorter SYZYGY pod.
This design has a PMOD for the SD card to emulate the SD card to the host system.
Evaluate USB Type-C CC control logic in DFP and UFP (or DRP) configurations. Also included is the PTN36043 USB3.0 SuperSpeed redriver.
Integrated isolated power supply, powerful fully isolated current sensing circuit for solar photovoltaic converters
The MAXREFDES117# reference design is a photoplethysmogram (PPG-optical) based heart-rate and SpO2 sensor. mbed and Arduino firmware and hardware design files as well as lab measurements are provided. Boards are available for purchase.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
