STEVAL-SILPC01 is a PLC solution with 1oo2 architecture, featuring CLT03-2Q3 dual-channel digital input and IPS160HF single-channel digital output. The hardware design meets the SIL level. It has been officially evaluated by TÜV Italia (TÜV SUD Group) to SIL 2/PL d requirements: Random failure rate, system capabilities (for hardware), architectural limits in accordance with IEC 61508, EN 62061, EN ISO 13849 - 1, EN ISO 13849-2 standard.
This reference design provides design guidelines, data, and more for a 100W LLC DC-DC converter using LLC resonance to achieve zero voltage switching.
The MAXREFDES41# reference design is a high-efficiency, high-precision, isolated DC-DC forward converter with an active clamp, current-mode PWM controller. The converter accepts 18V to 36V DC input and delivers output current up to 3.5A at 12V . Test results and hardware files provide complete documentation for the design. The board is also available for purchase.
FRDM-KW40Z is a development platform for KW40Z/30Z/20Z Kinetis ® W MCU, supporting Bluetooth Low Energy and IEEE ® 802.15.4 for portable healthcare, wearable sports fitness and home automation devices.
This solution has the characteristics of low cost and low energy consumption. It uses 32 GPIOs to control an 8x8x8 LED matrix and uses the DMX512 communication interface to receive commands from the computer or DMX512 host, giving you a new experience through continuous transformation.
Maxim Integrated's MAXREFDES79# reference design is a fully compliant IO-Link version 1.1, 4-port IO-Link Master using a TEConcept software stack. The system contains four IO-Link master transceivers, a standard ARM® Cortex® M3 processor, and efficient industrial step-down DC-DC converters. The MAXREFDES79# comes preprogrammed and ready to connect with any compliant IO-Link device using a simple-to-use graphical user interface (GUI) program. Design files including schematic, PCB, BOM, GUI software, and compliance report are available for download.
The LPCXpresso54628 development board provides a powerful and flexible development system for NXP ortex®-M4 LPC546xx series MCUs. They can be used in conjunction with a wide range of tools, including the MCUXpresso IDE.
This document explains how the Santa Fe (MAXREFDES5#) subsystem reference design meets the higher resolution, higher voltage, and isolation needs of industrial control and industrial automation applications. Hardware and firmware design files as well as FFTs and histograms from lab measurements are provided.
Dual brush DC motor driver expansion board for STM32 Nucleo, based on L6206
A MEMS acceleration sensor is used to convert the vibration signal into a voltage signal. The MCU collects the voltage signal into the MCU through the ADC module. Then the time domain signal is converted into a frequency domain signal through FFT changes, and the conversion result is displayed through the OLED module. This basically completes the function of the vibration analyzer.
This reference design provides design guidelines, data and other content for a 5kW isolated bidirectional DC-DC converter using a 1200V SiC MOSFET dual active bridge (DAB) conversion method.
Crest factor, peak and rms RF power measurement circuit optimized for high speed, low power and single 3.3 V supply
The LX2160A development board is used to design and evaluate the LX2160A processor. It loads the standard Linux kernel board-level support packages.
Low voltage dual brush DC motor driver expansion board for STM32 Nucleo, based on STSPIN240
The portable soldering iron launched by PINE64 in the early days was based on the GD32 design. This time it was upgraded to the second generation product, which was changed to the domestically produced BL706. Its feature is that it supports low-power Bluetooth. The Bluetooth OTA upgrade function will be added to IronOS later. IronOS supports a variety of portable DC, QC, and PD powered soldering irons, and supports all standard functions of smart soldering irons.
Discovery Board for ST25TV02K NFC Forum Type 5 Tag IC
Triple Output Isolated Flyback Converter Using VIPER267KDTR for STCOMET Smart Instruments and PLC Systems
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
