DIY Cars: Build Guide Using the TB67H450FNG

Smart Gate Driver Coupler TLP5214A Inverter Application

Schematic PCB

Application circuit of TLP7920 isolation amplifier (current detection)

Schematic PCB

Glider: Open-source Eink monitor with low latency (including detailed explanation of Elink principle)

Schematic PCB

TPD4151F square wave control BLDC motor drive application circuit

Schematic PCB

Gigabit Ethernet PHY and PC point-to-point communication procedures and corresponding tests

The physical layer data sending and receiving of a PC is very simple. As long as one condition is met, that is, the CRC check of the data packet is correct, the network card can send the data packet to the application software. Otherwise, the network card will directly discard the data packet, which cannot be caught by any software. to the data packet.

Schematic PCB

GPDI: SYZYGY interface board with 2 digital video ports

SYZYGY is an FPGA extension standard for medium to high speed interfaces. This project is a splitter that outputs video to a regular digital display and also supports input from a digital display.

Schematic PCB

Evaluation board for motor pre-driver IC and external FET driver board

Schematic PCB

2019 Electronic Competition Question E-Internet-based signal transmission system (Xidian University)

Schematic PCB

gpdi-serdes: GPDI using serdes

SYZYGY is an FPGA extension standard for medium to high speed interfaces. This design splits the video output to a regular digital display and also supports input from the digital display. It connects to the SERDES via a SYZYGY-TXR connector. Would love to be able to test the 5Gbps output of high resolution GPDI.

Schematic PCB

TPD4206F and TB6634FNG sine wave controlled BLDC motor drive application circuit

Schematic PCB

Open source USB2.0 high-speed analyzer

The analyzer host computer directly uses Wireshark. The hardware is implemented using Cypress CY7C68013A MCU + Lattice LCMXO2 FPGA + Microchip USB3343 USB PHY

Schematic PCB

EVAL_IPT015N10N5_TOLL: Infineon’s inverter-level solution for high-power motor control applications such as forklifts or low-speed vehicles

The 5kW evaluation board represents Infineon’s inverter-level solution for high-power motor control applications such as forklifts or low-speed vehicles. This reference design demonstrates the performance of Infineon's power MOSFET family OptiMOS™ in the new TO-Leadless package in terms of parallelization and thermal behavior.

TI ultra-low power wireless vibration sensor monitors motor reference design

Schematic PCB

TPD4207F small compressor motor drive application circuit

Schematic PCB

icebreaker++: icebreaker FPGA board, upgraded ECP5

icebreaker++ is a very nice and convenient little board. But it has a small flaw, the ice40 FPGA it uses is very simple, and it's generally fun to see people doing exciting projects with 5k LUTs. Sometimes it's convenient to have some extra space available when experimenting.

Schematic PCB

H-bridge drive circuits for automotive and industrial DC motors

Schematic PCB

Motor control closed loop system

Schematic PCB

FPGA-based Ethernet controller (MAC) source code

Schematic PCB

ChipWhisperer-Husky: Handheld Channel Power Analysis and Fault Injection Tool

ChipWhisperer-Husky is a compact package for experimental side-channel power analysis and fault injection. It follows in the footsteps of our ChipWhisperer-Lite and ChipWhisperer-Pro products and adds new features such as a high-speed logic analyzer for visualizing faults, real-time data streaming for attacking asymmetric algorithms, and additional I/O Extension pins.

Schematic PCB