1 kW three-phase motor control evaluation board with L6390 driver and STGP10H60DF IGBT
FRDM-KL28Z is a development board for Kinetis KL28 72Mhz 32-bit Arm ® Cortex ® -M0+.
The reference design is a BLDC motor controller designed to be powered by a single 12V (nominal voltage) supply with a wide voltage range found in typical automotive applications. The board is designed to drive motors in the 60W range, which requires a current of 5 amps. The size and layout of the board facilitates evaluation of the drive electronics and firmware, with easy access to key signals on various test points. A wide variety of motors can be connected by using a 3-contact connector or soldering the motor phase wires to the plated through holes in the board. The 12VDC supply is fused to prevent damage to the board or bench power supply in the event of a motor failure during testing. Commands and the status of the motor can be transmitted through a standard JTAG connector or through PWM input and output signals. The user can also reprogram the microcontroller through the JTAG connector, allowing customization for various applications. This design forms the solution by incorporating the DRV8301-HC-C2-KIT board.
New Analog/Analog Isolator Using Isolated Σ-Δ Modulator, Isolated DC/DC Converter and Active Filter
FRDM-KL27Z is an ultra-low-cost development platform for Kinetis L-series KL17 and KL27 MCUs based on Arm ® Cortex ® -M0+ processors.
5 kW low voltage high current inverter for industrial motor control applications
Compact reference design for battery-operated brushless power tools based on STSPIN32F0252
S12ZVML12EVB & S12ZVMC12EVB are 16-bit MCU development boards for S12 MagniV ® S12ZVM, suitable for two-phase DC and three-phase BLDC or PMSM motor control applications, covering S12ZVML128/64/32 and S12ZVMC128/64 MagniV products.
Based on the digital DC servo driver solution developed by M483KGCAE2A, the control principle of this design is closed-loop control of space vector. The MCU single chip completes the corresponding closed-loop control (current loop, speed loop). The system has high performance, high reliability, easy maintenance and comprehensive Digitalization and other advantages make it convenient for customers to conduct second R&D on this platform and shorten product development time.
Protues simulation example (8051)-stepper motor
Dual brush DC motor driver expansion board for STM32 Nucleo, based on STSPIN840
Control stage based on STM32F100CB microcontroller for motor control with serial communication user interface
The LPCXpresso family of boards provides a powerful and flexible development system for NXP's LPC Cortex®-M family of microcontrollers. They can be used with a wide range of development tools, including NXP MCUXpresso IDE. The LPCXpresso54018, developed by NXP, can be used to evaluate and prototype the LPC540xx series of MCUs.
Low voltage brushed DC motor driver expansion board for STM32 Nucleo, based on STSPIN250
Low-voltage full-bridge reference design board features L6393 advanced high-voltage gate driver
The TWR-K70F120M is a development board for the Kinetis K61 and K70 families 32-bit Arm® Cortex®-M4 MCUs.
The EVSPIN32F02Q1S1 board is a 3-phase complete inverter based on the STSPIN32F0251 controller, which embeds a 3‑phase 250 V gate driver and a Cortex®-M0 STM32 MCU. The power stage features STD17NF25 MOSFETS, but can be populated with any IGBT or Power MOSFET in DPAK or powerFLAT 6x5 package.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
