Drives two-phase bipolar stepper motors up to 1A DC

Schematic PCB

DRV8662EVM: 50-200V Piezo Haptic Driver

Schematic PCB

60W Brushless DC (BLDC) Automotive Motor Driver Design BOM, PCB Files and Gerber Files

The reference design is a BLDC motor controller designed to be powered by a single 12V (nominal voltage) supply with a wide voltage range found in typical automotive applications. The board is designed to drive motors in the 60W range, which requires a current of 5 amps. The size and layout of the board facilitates evaluation of the drive electronics and firmware, with easy access to key signals on various test points. A wide variety of motors can be connected by using a 3-contact connector or soldering the motor phase wires to the plated through holes in the board. The 12VDC supply is fused to prevent damage to the board or bench power supply in the event of a motor failure during testing. Commands and the status of the motor can be transmitted through a standard JTAG connector or through PWM input and output signals. The user can also reprogram the microcontroller through the JTAG connector, allowing customization for various applications. This design forms the solution by incorporating the DRV8301-HC-C2-KIT board.

Schematic PCB

LV8746V with selectable CLK-IN input and parallel input

Schematic PCB

Stepper Motor Control Evaluation Board for Thick Film Hybrid IC Unipolar Constant Current Chopper Circuit

Schematic PCB

CC3D Quadcopter Open Source Data

Schematic PCB

Obstacle Avoidance Robot Circuit Design Solution

Schematic PCB

3D printer motherboard circuit design based on ESP32S

Schematic PCB

Closed-loop servo stepper motor complete set of information (schematic diagram + PCB + source code)

Schematic PCB

Controlling the Direction of a DC Motor Using an H-Bridge Driver PCB Reference

Schematic PCB

[Open Source] Reference Design of a Three-Axis Writing Machine Motherboard Based on Arduino

Schematic PCB

AMULET, a high-performance open source BLDC controller for legged robots

Schematic PCB

Integrated Turnkey Reference Design for Rotary Refrigerator Compressor Drive

Schematic PCB

NavQPlus AI/ML supporting computer EVK, suitable for mobile robots, ROS, ground stations and cameras

Schematic PCB

OrangeBox Automotive Connectivity Domain Controller Development Platform

OrangeBox is a comprehensive development platform that provides a wide range of secure wireless connectivity to develop automotive solutions that meet the requirements of connected domain or zone controllers. OrangeBox integrates a scalable i.MX 8XLite applications processor, S32K security co-processor and the wireless connectivity required to enable secure automotive access, V2X, Wi-Fi, Bluetooth® LE, UWB and cellular connectivity between the vehicle and the outside world In a safe and secure manner.

Based on STM32G431, a compact closed-loop servo driver designed for NEMA17 (42mm) stepper motors

Schematic PCB

Brushless power tool reference design (handheld electric drill reference design) based on STM32G431 and STDRIVE101

Schematic PCB

TI ultra-low power wireless vibration sensor monitors motor reference design

Schematic PCB

Ardufocus-DRV8825: Precise open source focus controller

Ardufocus is the only OSS/OSH controller to support two independent focus motors, the high-resolution mode allows for stepwise sub-micron movements, multiple acceleration profiles, and it never forgets the focuser position between restarts.

Schematic PCB

Robot control board

2 Layers PCB 54.6 x 90.2 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen;

Schematic PCB