The MAXREFDES74# is a precision data acquisition system which includes an 18-bit, 500ksps, ±5V SAR analog-to-digital converter (ADC), the MAX11156, and an 18-bit, 3µs settling time, ±2 LSB (max) INL digital-to-analog converter (DAC), the MAX5318. The data acquisition system can be used as a stand-alone evaluation board or as a mezzanine card to ZedBoard™, a development board for the Xilinx ® Zynq ® -7000 All Programmable SoC.
The MAXREFDES61# reference design ushers in the era of Industry 4.0. With a complete analog front-end for the next generation of ultra-small programmable logic controllers, this design meets the higher resolution and higher voltage needs of industrial control and industrial automation applications, while consuming minimal power and space. This high-performance system features four channels of analog input, a complete, efficient power-supply system and on-board processing. Hardware and firmware design files as well as FFTs and histograms from lab measurements are provided.
The MAXREFDES61# reference design ushers in the era of Industry 4.0. With a complete analog front-end for the next generation of ultra-small programmable logic controllers, this design meets the higher resolution and higher voltage needs of industrial control and industrial automation applications, while consuming minimal power and space. This high-performance system features four channels of analog input, a complete, efficient power-supply system and on-board processing. Hardware and firmware design files as well as FFTs and histograms from lab measurements are provided.
The MAXREFDES70# reference design is a high-precision, low-cost, low-power consumption, battery-powered heat/flow meter featuring the MAX35101 ultrasonic time-to-digital (TDC) converter with analog front-end (AFE). The reference design provides a high-performance flow/heat meter design platform that works as a foundation for many specific meter applications. The system utilizes the ultrasonic time-of-flight (TOF) measurement principle. A 3.6V, 4.0Ah, size A lithium -thionyl chloride battery powers the system and can last up to 20 years for typical use. Test results, hardware files, and firmware source code provide complete documentation for the design. The complete meter is also available for purchase.
The MAXREFDES38# subsystem reference design is a 3-channel, high-accuracy, low-power analog front-end solution for EPT/ECT and smart-grid current fault-sensing applications. Hardware, firmware, design files, and lab measurements provide complete system information for rapid prototyping and development.
The MAXREFDES75# is a high-resolution weigh scale reference design with a 0 to 10V output. The design, or strain-gauge measuring system, includes the MAX11270, a 24-bit, 64ksps, delta-sigma analog-to-digital converter ( ADC), and the MAX542, a 16-bit, 1µs settling time, 2 LSB (max) INL digital-to-analog converter (DAC). The MAXREFDES75# operates as a stand-alone reference board and includes calibration using a USB and a Windows ® PC.
Maxim Integrated's MAXREFDES42# reference design is a low-power, IO-Link RTD temperature sensor compliant with IEC 61131-9. The system contains an RTD-to-digital converter, an IO-Link transceiver, an efficient step-down converter, and a display. The MAXREFDES42# comes preprogrammed and ready to connect with a version 1.1-compliant IO-Link master. Design files including the schematic, PCB, BOM, and firmware source code are available for download.
The MAXREFDES73# reference design is a wearable, mobile galvanic skin response system. Featuring the MAX32600 wellness measurement microcontroller, this battery-powered platform takes high-precision AC impedance measurements while consuming minimal power.
The MAXREFDES46# subsystem reference design meets the needs of modern factory control nodes by featuring four, dense, highly accurate analog inputs and outputs in a compact, galvanically isolated form factor. Analog input channels measure current or voltage and analog output channels provide current or voltage . This design uniquely fits programmable logic controllers (PLC), distributed control systems (DCS), and other industrial applications. Hardware and firmware design files and lab measurements are provided for rapid prototyping and development. The board is also available for purchase.
Maxim Integrated's MAXREFDES79# reference design is a fully compliant IO-Link version 1.1, 4-port IO-Link Master using a TEConcept software stack. The system contains four IO-Link master transceivers, a standard ARM® Cortex® M3 processor, and efficient industrial step-down DC-DC converters. The MAXREFDES79# comes preprogrammed and ready to connect with any compliant IO-Link device using a simple-to-use graphical user interface (GUI) program. Design files including schematic, PCB, BOM, GUI software, and compliance report are available for download.
This reference design demonstrates the performance of the MAX44285 dual-channel, high-precision, high-voltage, current-sense amplifier. It is a Pmod module that contains all the necessary circuitry required for the design of a current and temperature monitoring system.
The MAXREFDES82# reference design is an industrial, smart force sensor. Four load cells mounted on a quadrant plane are channeled to a multi-channel 24-bit ADC and the conversion results are computed to indicate the force magnitude, position and movement on a flat cover.
MAXREFDES143# subsystem reference design secures industrial IoT systems using a DS2465 SHA-256 Coprocessor and DS28E15 SHA-256 authenticator with 1-Wire.
The MAXREFDES117# reference design is a photoplethysmogram (PPG-optical) based heart-rate and SpO2 sensor. mbed and Arduino firmware and hardware design files as well as lab measurements are provided. Boards are available for purchase.
The MAXREFDES165# is a fully IO-Link®-compliant, 4-port IO-Link master reference design. This design uses TMG TE’s IO-Link master stack and is both an IO-Link master reference design as well as an IO-Link sensor/actuator development and test system. Four IO-Link ports allow for simultaneous testing of up to four different sensors (or actuators).
Maxim health sensor (hSensor) platform helps customers evaluate Maxim's complex and innovative medical and high-end fitness solutions faster and easier. The hSensor platform supports the measurement of motion, precision skin temperature, biopotential measurements, and reflective photo plethysmography measurements, etc. The hSensor comes with a PC graphical user interface (GUI) application and Android application for customers to evaluate the sensors and other devices on the board. Hardware files and firmware source code provide complete documentation for the design. The board is also available for purchase.
The MAXREFDES1152 is a four-channel universal analog input that measures voltage or current signals. Each channel can be configured for voltage input at 0 to 10V or current input at 0 to 20mA. A 24V power supply can be switched out to power an external 2 -Wire, 3-Wire, or 4-Wire sensor.
This application note demonstrates how to make a simple system that monitors temperature and analog voltages remotely. On meeting certain alarm conditions, the system can send SMS messages, which are then converted to email and forwarded to the designated email address.
barometer altimeter pressure sensor
DEMOAPEXSENSOR is an experimental demonstration board dedicated to pressure sensors for various applications.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
