PD85050S based RF power module for mobile radio applications

PD85050S based RF power module for mobile radio applications

Schematic PCB

OM14510-SJA1105TJP: Automotive Ethernet switch application board

OM14510/SJA1105TJP is an application board used to evaluate SJA1105EL and SJA1105TEL

Schematic PCB

12Gbps multi-channel BERT board reference design

This reference design is a 12Gbps low-cost bit error tester (BERT) that generates and checks up to 8 channels of pseudo-random binary sequences (PRBS). This proven design provides a convenient way to generate multi-lane high-speed serial bit streams up to 12Gbps and inspect the incoming serial bit stream for bit errors. This design can be used as a handheld BERT to evaluate the signal integrity and bit error performance of high-speed subsystems.

Schematic PCB

CN0337

带三线式补偿的12位、300 kSPS、单电源、完全隔离式RTD温度测量系统

Schematic PCB

CN0256

Isolated LVDS interface circuit

Schematic PCB

Corona (MAXREFDES12#): Isolated, eight-channel, industrial digital input level translator/serializer

This document explains how the Corona (MAXREFDES12#) subsystem reference design provides a compact and simple isolated digital input interface for industrial control and automation applications. Hardware and firmware design files are provided.

Schematic PCB

OM13500: PCA8538 Evaluation Board

CN0290

Extending the low-frequency range of high-performance phase-locked loops

Schematic PCB

CN0336

12-bit, 300 kSPS, single supply, fully isolated data acquisition system for 4-20 mA input

Schematic PCB

CN0278

Complete 4 mA to 20 mA HART solution with additional voltage output capability

Schematic PCB

Voice User Interface Evaluation Kit

Voice user interface evaluation kit

Schematic PCB

Evaluation board based on IMP23ABSU analog MEMS microphone

Microphone coupon board based on the IMP23ABSU analog MEMS microphone

Schematic PCB

OM13503: PCA8539 Demonstration Board

Multi-cell battery manager unit with integrated charging, fuel monitoring, authentication and protection functions

The Texas Instruments (TI) bq40z60 device is a battery pack manager that integrates battery charge control output, fuel monitoring and protection functions to enable fully autonomous operation of 2- to 4-cell Li-ion and Li-polymer battery packs. This architecture enables internal communication between the gas-monitoring processor and the battery charger controller to optimize charge based on external load conditions and power path source management during system load transients and adapter current limits. The charging current efficiency is different for different power delivery external components such as NFETs, inductors and sense resistors.

Schematic PCB

Open source current probe based on Rogowski coil

Schematic PCB

Optimize the load switching function of DS2715 battery charger

Integrating a battery-load switch function into a smart-charger IC greatly benefits low-cost applications. The DS2715 battery-charger IC intelligently senses battery loading after removal of the charge source to seamlessly maintain power to connected loads. This application note details examples of several application circuits that optimize the performance of the DS2715. Specifically, it presents a circuit for applications in which the DS2715 is connected to noncontinuous loads, and a circuit for powering the load directly from batteries.

350 W-48 V Demonstration Board using 1x STAC2942B for FM Broadcast Application (VHF Amplifier 87.5-108 MHz)

350 W - 48 V Demonstration Board using 1x STAC2942B for FM Broadcast Application (VHF Amplifier 87.5 - 108 MHz)

Schematic PCB

CN0146

Construct a low-cost programmable gain instrumentation amplifier circuit using the four-channel single-pole single-throw switch ADG1611 and the instrumentation amplifier AD620

Schematic PCB

CN0186

Phase Coherent FSK Modulator

Schematic PCB

CN0296

Low cost, high performance SOUND BAR system

Schematic PCB