This design implements a bidirectional, non-isolated buck-boost power converter suitable for solar microconverters, hybrid electric vehicles (HEV), and battery charging applications.
This reference design provides a complete set of color RGBW LED lights controlled by ZigBee Light Link. The light has four colors of LEDs (red, green, blue, white) and is powered via USB. These LEDs are controlled by a CC2531 device running the ZigBee Light Link software stack. In order to save space and cost, the circuit board is equipped with a half-wave dipole PCB antenna.
The USB Type-C™ and Power Delivery (PD) MicroDock Evaluation Module (EVM) provides a complete USB Type-C dock reference solution including audio, USB data, power delivery and video. The EVM has a small 2-inch × 4-inch form factor and supports both sourcing and sinking power capabilities through the USB Type-C PD host port. Video output capabilities include DisplayPort and HDMI.
This advanced motor implements closed-loop speed control to maintain precise RPM across load torque profiles. The DRV5013 Hall-effect sensor senses the magnetic rotor position, and the DRV8308 controller determines when to drive the CSD88537ND FET that energizes the coil . Without the use of a microcontroller or firmware, the sinusoidal current minimizes noise and torque ripple, maximizing motor performance.
This shunt-based, isolated current measurement unit enables high-precision current measurement without the use of current transformers (CTs). Isolation is achieved through the AMC1304 which integrates high voltage isolation and a Delta-Sigma modulator . This solution avoids the need to use CTs, which is highly valued by customers as it reduces board size, product weight, crosstalk and EMI in the system, and reduces mechanical requirements by replacing CTs with shunts. problems, potentially extending product life.
This reference design features TI's DLP2010 (.2 WVGA) DMD chipset and is designed to enable ultra-low power and ultra-mobile displays either embedded into systems (e.g. smartphones, tablets, etc.) or as a standalone add-on module application. This chipset is used in designs containing the DLP2010 (.2 WVGA) DMD, DPC3435 display control, and DLPA2005 PMIC/LED driver.
TIDM-CAPTIVATE-64-BUTTON TI reference design demonstrates an ultra-low power touch panel with 64 buttons that can be controlled from a single MSP microcontroller (MCU) with CapTIvate™ technology. The design uses mutual capacitance technology to ensure that all 64 buttons are tightly packed and can be controlled with just 16 MCU pins. This touch panel easily connects to the CAPTIVATE-FR2633 MCU target module included in the MSP-CAPT-FR2633 MCU development kit.
Brushed motors are a relatively popular motor design option due to their low price and simple control scheme. A brushed motor has a wound rotor and a permanent magnet stator. The motor is commutated via a conductive ring: this ring is connected to the rotor, which uses a brush to scrape against the commutator ring, thus commutation is achieved. Therefore, the direction of current flowing through the motor can change depending on the brush orientation and different commutation rings. Simple direction changes and speed control changes can be quickly and efficiently implemented on brushed DC motors using an H-bridge. An electronic driver is required to control the motor current in a brushed DC motor. The electronic drive circuit contains a power stage with a two-phase inverter (to meet the required power intensity), a microcontroller for implementing motor speed commands and fault handling, a current sensing function for motor start/stop protection, for control Gate drivers for two-phase inverters and power supplies for microcontrollers and other low-voltage devices.
This reference design utilizes an isolated modulator and independent digital filter to implement a Class 0.5 three-phase power measurement system with an isolated shunt sensor, eliminating the need for an integrated synchronization filter and allowing an optional host microcontroller (MCU). ) will be broader in scope. In this design, the current sensed by the isolated modulator and the phase voltage sensed by the host microcontroller are synchronized; more advanced metering algorithms are supported using the Simplelink™ ARM Cortex M4 host MCU. This design protects against magnetic tampering attacks by using current sensors and a power supply that does not use any transformers or other magnetic components. This subsystem design has been tested and includes hardware.
This reference design demonstrates an interface implementation to multiple high-voltage bipolar input, 8-channel, multiplexed input SAR ADCs (6) via a Sitara Arm processor using a Programmable Real-Time Unit (PRU- ICSS) expands the number of input channels. The ADCs can be configured so that the same channels can be sampled simultaneously across all ADCs. This design highlights the PRU-ICSS's ability to handle a data rate of 1536ksps (each sample = 16 bits) (640 samples sampled per line cycle). For a 50Hz period, this equates to 32ksps per channel between 6 ADCs simultaneously (640 samples/period*50Hz*6 ADC*8 channels = 1536ksps). In addition, a second PRU is used to post-process the data to achieve coherent sampling.
The PMP11769 reference design is a comprehensive solution for 700W automotive audio amplifiers. This boost converter provides a 36.0V, 10.0A continuous/20.0A peak output from an input voltage of 9 to 16V. It contains two Class D amplifiers delivering 2 x 175W (loaded into 4 ohms, left and right channels) and 1 x 350W (loaded into 2 ohms, subwoofer) power.
This fully tested, USB power delivery reference design is a high efficiency, high power density, AC/DC adapter solution with a wide input voltage range (85 - 265VAC) for laptop adapters and smartphone charger applications. It adopts active-clamp-flyback topology controlled by TI’s newest ACF controller UCC28780 as the mainly power supply stage. This design uses TPS25740B, TI’s PD source controller, to achieve a full PD 2.0 function. The design achieves a peak efficiency of 94% at a very high switching frequency. The design’s power density is increased to 30 W/in3, which is much higher than traditional solutions.
Now, through the Internet of Things (IoT) environment, many products have become "at your fingertips", including test equipment such as digital multimeters (DMMs). The TIDA-01012 reference design, implemented on Texas Instruments' SimpleLink™ ultra-low-power wireless microcontroller (MCU) platform, demonstrates a 4.5-digit, 100kHz connected true RMS digital multimeter , featuring Bluetooth Low Energy connectivity, NFC Bluetooth pairing® and auto-wake up with TI's CapTIvate™ technology.
This reference design demonstrates an ultra-low power capacitive touch panel solution powered by a single MSP430™ microcontroller (MCU) with CapTIvate™ technology. The use of self- and mutual-capacitance technology enables multifunctional capacitive touch panels (buttons and proximity sensors) to be used in electronic locks and other applications with various human-machine interfaces. This TI reference design also shows how to extend battery life by cyclically running the MSP430 CPU and switch between low-power and run modes.
The TIDA-00195 reference design includes a 22kW power stage and TI's new reinforced isolated IGBT gate driver ISO5852S for motor control in a variety of applications. This design enables the performance evaluation of the ISO5852S in a three-phase inverter integrating an IGBT module with a rated voltage of 1200V and a rated current range of 50A-200A. Some of the important features and performances evaluated include short-circuit protection using DESAT detection, soft shutdown, effectiveness of active Miller clamping at different inverter dv/dt, and IGBT gate driver derived from adjustable speed electrical System-level ESD/EFT performance of electric drive systems (IEC61800-3). Piccolo Launch Pad LAUNCHXL-F28027 is used to generate the PWM signals required for inverter control.
This "RF Layout Reference Design" demonstrates excellent decoupling and layout techniques for low power RF devices in the 169 MHz band.
The TIDA00255 reference design utilizes the bq76940 analog front end (AFE) IC. It can measure battery voltage, mold temperature or external thermistor voltage using a 14-bit ADC. Current is measured individually by a separate 16-bit coulomb counter. The design turns off the low-side power FET to stop discharging or charging based on selected hardware limits. A microcontroller not included in this design will be part of the battery controller to communicate with the AFE to set protection thresholds, enable the power FETs, provide fault recovery, and shut down the FETs during over/under temperature conditions. Battery controller designs may include additional features that are not part of this reference design, such as secondary overvoltage protection, measurement, and isolated communications to inform the system of battery status.
TIDA-00709 is a 36W dual-output auxiliary power supply with universal DC input, targeting server and telecom power supplies. This reference design uses the UCC28740 constant voltage/constant current (CV-CC) flyback controller to implement a quasi-resonant (QR) flyback converter with optocoupled feedback for voltage and primary-side regulation for current ( PSR). To improve efficiency, the TIDA-00709 uses a synchronous rectifier with a synchronous controller UCC24636 and a low RDS(on) MOSFET to achieve a 12V_ISO/2.75A main output. This design is small and economical and has almost all necessary built-in protection mechanisms, such as protection against output overvoltage and short circuits. Additionally, the design features built-in electronic fuses for fault isolation on the 12V main output voltage rail without affecting any other outputs.
The unique inductive sensing capabilities of the LDC1314 are used to implement a contactless rotational position sensing solution accurate to 1 degree. It uses standard PCB technology and simply manufactured components to achieve a low-cost solution.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
