Evaluation kits (EV kits) are often the best tool for evaluating the applicability of a particular DC-DC converter for a specific application. Simulation, though never as accurate as the real hardware, is much faster and can be very effective for initial evaluations. Maxim Integrated’s MAX17504EVKITA is a 3.3V output EV kit for the MAX17504 member of the Himalaya family of high-voltage, synchronous step-down converters. The MAXIM_EESIM_MAX17504EVKITA.wxsch is a circuit file that enables simulation of this EV kit using the free EE-Sim SE simulation tool, downloadable from the Maxim Integrated website. EE-Sim SE is a variation of the commercial SIMPLIS/SIMetrix tool, which can also be used with this file.
Maxim Integrated's MAXREFDES79# reference design is a fully compliant IO-Link version 1.1, 4-port IO-Link Master using a TEConcept software stack. The system contains four IO-Link master transceivers, a standard ARM® Cortex® M3 processor, and efficient industrial step-down DC-DC converters. The MAXREFDES79# comes preprogrammed and ready to connect with any compliant IO-Link device using a simple-to-use graphical user interface (GUI) program. Design files including schematic, PCB, BOM, GUI software, and compliance report are available for download.
This reference design demonstrates the performance of the MAX44285 dual-channel, high-precision, high-voltage, current-sense amplifier. It is a Pmod module that contains all the necessary circuitry required for the design of a current and temperature monitoring system.
MAXREFDES89# is an mbed®-compatible shield for the rapid development of brushed DC motor applications. The shield contains four MAX14871 full-bridge DC motor drivers for driving up to 4 motors. A MAX17501 DC-DC converter allows the system to operate from a single 7 to 36VDC power supply. Four MAX4704 4:1 multiplexers permit setting the current regulation mode of the MAX14871, while two MAX5387 digital potentiometers provide the ability to set the motor current limit. A MAX7300 GPIO expander supports interfacing each motor driver circuit to the mbed enabled microcontroller platform.
The MAXREFDES82# reference design is an industrial, smart force sensor. Four load cells mounted on a quadrant plane are channeled to a multi-channel 24-bit ADC and the conversion results are computed to indicate the force magnitude, position and movement on a flat cover.
This document details the MAXREFDES112# subsystem reference design, a 17V to 36V input, 12V output, flyback isolated power supply capable of 10W. Design files and test results are included. Hardware is available for purchase.
This document details the MAXREFDES111# subsystem reference design, an 18V to 36V input, 5V/2W output, flyback isolated power supply. Design files and test results are included. Hardware is available for purchase.
MAXREFDES115# is an efficient active clamp topology design with 24V input, and a 5V output at 4A (20W) of power. The design features the MAX17599, an active clamp, current-mode PWM controller optimized for industrial supplies.
MAXREFDES99# is an Arduino form factor compatible shield for the rapid development of LED displays using the MAX7219 LED display driver.
MAXREFDES143# subsystem reference design secures industrial IoT systems using a DS2465 SHA-256 Coprocessor and DS28E15 SHA-256 authenticator with 1-Wire.
This document details the MAXREFDES98# subsystem reference design, a 36V to 57V input, 5V output, step down, non-isolated power supply capable of 12.5W. Design files and test results are included. Hardware is available for purchase.
This document details the MAXREFDES108# subsystem reference design, a 36V to 57V input, 12V output, step down non-isolated power supply capable of 12W. Design files and test results are included. Hardware is available for purchase.
The MAXREFDES117# reference design is a photoplethysmogram (PPG-optical) based heart-rate and SpO2 sensor. mbed and Arduino firmware and hardware design files as well as lab measurements are provided. Boards are available for purchase.
This document details the MAXREFDES113# subsystem reference design, a 17V to 36V input, 12V output, flyback isolated power supply capable of 20W. Design files and test results are included. Hardware is available for purchase.
The MAX17681/MAX17681A is a high-voltage, highefficiency, iso-buck DC-DC converter designed to provide isolated power up to 5W. The device operates over a wide 4.5V to 42V input and uses primary-side feedback to regulate the output voltage .
The MAX17681/MAX17681A is a high-voltage, highefficiency, iso-buck DC-DC converter designed to provide isolated power up to 5W. The device operates over a wide 4.5V to 42V input and uses primary-side feedback to regulate the output voltage .
The MAXREFDES1161 is a small form factor, high accuracy, 2-wire 4mA to 20mA transmitter which integrates all functional and protection blocks in a small 1.0in x 0.6in dual-row header footprint that is compatible with breadboards and off-the-shelf peripheral expansion boards.
Due to its simplicity and low cost, the flyback converter is the preferred choice for low-to-medium isolated DC-DC power-conversion applications.
Power over Ethernet (PoE) is a technology that allows network cables to deliver power to a powered device (PD) through power-sourcing equipment (PSE) or midspan, and has many advantages over traditional methods of delivering power.
Power over Ethernet (PoE) is a technology that allows network cables to deliver power to a powered device (PD) through power-sourcing equipment (PSE) or midspan, and has many advantages over traditional methods of delivering power.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
