This is a 35W 19.0V/1.84A USB adapter reference design using quasi-resonant PWM integrated circuit ICE2QS03G, CoolMOS™ IPD60R600P6 (DPAK), 2 small signal low voltage MOSFETs 2N7002 and high-speed switching diode BAS21-03W in a short brick shape , peak power is 45W, lasting 2 milliseconds.
This is a 10.5W 5.0V USB adapter reference design using Infineon's quasi-resonant PWM integrated circuit ICE2QS03G and CoolMOS™ IPU60R950C6 (IPAK), with a small form factor architecture and multiple protection modes to achieve high system reliability.
This 65W Type-C PPS reference design uses Infineon's EZ-PD™ PAG1S and PAG1P controllers and CoolGaN™ 600V GIT HEMT. The solution complies with international energy efficiency standards including DoE Level 6/CoC Level 2 and has low standby power. The solution is tested to CE standards defined by CISPR32 Class B and provides a high board-side power density of 22.16 W/in3. This solution is designed for use with USB PD (including PPS), QC power adapters. Adapters covering traditional charging protocols including Apple Charging, BC1.2, QC 3.0 and Samsung AFC are also supported. PAG1S and PAG1P jointly provide low BOM cost, high-performance solutions compatible with PD/PPS/QC.
Turnkey reference design kit for low voltage, high performance, high efficiency and high speed PMSM/BLDC motor drive applications is a reference design kit using the IMC101T iMOTION controller, 2ED2304 SOI half-bridge gate driver and BSC030N04NS OptiMOS. This reference design kit showcases our thin-film SOI and advanced motion control engine (MCE 2.0) technology enabling drive speeds up to 120KRPM for low-voltage permanent magnet motors, while the inverter section is rated up to 30 V and 25 A. It has been optimized for low voltage appliances such as vacuum cleaners, fans, pumps, compressors and other low voltage motor drive applications.
REF_ICL8820_LED_43W_JT This 43 W reference design uses Infineon's high power factor flyback controller ICL8820. The evaluation board is a constant voltage (CV) secondary side regulation (SSR) system designed for use with a constant current (CC) converter for LED lighting applications.
This 45W Type-C PPS reference design uses Infineon's EZ-PD™ PAG1s and PAG1P controllers and CoolGaN™ 600V GIT HEMT. The solution complies with international energy efficiency standards including DoE Level 6/CoC Level 2, and its standby power can be as low as less than 30 mW. The solution is tested to CE standards defined by CISPR32 Class B and achieves a high board-side power density of 17.71 W/in3. This solution is designed for use with USB PD (including PPS), QC power adapters. Adapters covering traditional charging protocols including Apple Charging, BC1.2, QC 3.0 and Samsung AFC are also supported. PAG1S and PAG1P jointly provide low BOM cost, high-performance solutions compatible with PD/PPS/QC.
This is a 15W 5V USB adapter reference design board using quasi-resonant PWM IC ICE2QS03G (DSO-8) with CoolMOS™ IPS65R1K5CE (IPAK SL) and secondary side synchronous rectification with OptiMOS™ BSZ100N06LS3G (S3O8, 3x3 mm style SuperSO8) IR1161 (5-pin SOT-23). Designed for high-reliability systems, this reference USB adapter board features a compact form factor, high efficiency, low standby power, various protection methods, and passes conductive electromagnetic interference, ESD, and lightning shock wave testing. Customers only need to make slight changes to this board, and it can be used for production after final confirmation.
REF_ICL8810_LED_43W_BM This 43 W reference design uses Infineon's high power factor flyback controller ICL8810. The evaluation board is a constant voltage (CV) secondary side regulation (SSR) system designed for use with a constant current (CC) converter for LED lighting applications. Two-stage topologies are becoming increasingly popular due to the easy scalability of primary-side power and secondary-side characteristics. The REF_ICL8810_LED_43W_BM solution features a plug-and-play design and can be used with the secondary-side DC/DC evaluation board. As a default, the reference design board is equipped with a depletion mode MOSFET BSS126I based startup circuit on a small adapter board. This setup will significantly reduce standby losses. If low standby power consumption is not required, the startup circuit can be changed to a resistive startup design. This reference design comes with two conditioning circuits. Both are plug-and-play solutions, but at least one circuit must be connected to the motherboard. There is a cost trade-off between the two evaluation boards; the TL431 evaluation board is lower cost and has good standby performance, while the op amp board exhibits excellent overall performance at the 30 mW power level. With its benchmark power factor correction and total harmonic distortion performance at full and light load conditions, the ICL8800 supports window driver and platform designs. In addition, the IC combines excellent efficiency with low EMI characteristics without compromising light quality.
This 65 W USB-PD type-C PPS charger reference design uses Infineon's EZ-PD™ PAG1S and PAG1P P controllers, EZ-PD™ CCG7D PD controller, and Infineon's high-voltage CoolMOS™ superjunction MOSFETs. The solution complies with DoE Level 6 international energy efficiency standards and passes conducted emissions testing in accordance with the EN 55032 B standard.
The 65W power adapter reference design is based on the EZ-PD™ PAG1s and PAG1P controllers. The solution complies with international energy efficiency standards including DoE Level 6/CoC Level 2 and passes conducted emissions testing as specified in the EN 55032 B standard. This solution is designed for use with USB-C PD (including PPS), QC power adapters. Adapters covering traditional charging protocols including Apple Charging, BC1.2, QC 3.0 and Samsung AFC are also supported. PAG1S and PAG1P together provide low BOM cost and high-performance solutions compatible with PD/PPS/QC.
REF_ICL8800_LED_43W This 43 W reference design uses Infineon's high power factor flyback controller ICL8800. The evaluation board is a constant voltage (CV) secondary side regulation (SSR) system designed for use with a constant current (CC) converter for LED lighting applications. Two-stage topologies are becoming increasingly popular due to the easy scalability of primary-side power and secondary-side characteristics. The REF_ICL8800_LED_43W solution features a plug-and-play design and can be used with the secondary-side DC/DC evaluation board. As a default, the reference design board is equipped with a depletion mode MOSFET BSS126I based startup circuit on a small adapter board. This setup will significantly reduce standby losses. If low standby power consumption is not required, the startup circuit can be changed to a resistive startup design. This reference design comes with two conditioning circuits. Both are plug-and-play solutions, but at least one circuit must be connected to the motherboard. There is a cost trade-off between the two evaluation boards; the TL431 evaluation board is lower cost and has good standby performance, while the op amp board exhibits excellent overall performance at the 30 mW power level.
15W 5.0V high-efficiency USB adapter reference design board, using Infineon's quasi-resonant PWM IC ICE2QS03G with CoolMOS™ IPS65R1K0CE (IPAK) and secondary side synchronous rectification IC with OptiMOS™ BSC067N06LS3 G (ThinPAK), small size, high efficiency, Various protection modes can be provided for high-reliability systems.
This is a 15W 5.0V / 3.0A USB adapter reference design using Infineon quasi-resonant PWM IC ICE2QS03G, CoolMOS™ IPL65R1K5C6S (ThinPAK 5x6), OptiMOS™ BSC067N06LS3G and high-speed switching diode BAS21-03W, with a slim plug profile and Multiple protection modes, suitable for high reliability systems.
This is a 15W 5.0V/3.0A USB adapter reference design using an AC-DC quasi-resonant PWM controller IC (ICE2QS03G), an IPAK packaged 700V CoolMOS™ P7 SJ MOSFET (IPS70R1K4P7S), an OptiMOS™ 60V low voltage power MOSFET ( BSC067N06LS3G) and high-speed switching diodes (BAS21-03W), shaped like slim plugs with various protection modes.
15W 5.0V high-efficiency USB adapter reference design board, using Infineon's quasi-resonant PWM IC ICE2QS03G with CoolMOS™ IPS65R1K5CE (IPAK) and secondary-side synchronous rectification IC with OptiMOS™ BSC067N06LS3 G (ThinPAK), small size, high efficiency, Various protection modes can be provided for high-reliability systems.
This is a reference design for a 65W USB-PD type C charger with a small form factor. Reference designs are designed to demonstrate performance by meeting various industry specifications and allowing for small form factor design requirements. Using Infineon digital flyback controller XDPS21081, 600V CoolMOS™ C7 superjunction MOSFET (IPL60R185C7), OptiMOS™ PD synchronous rectification MOSFET (BSC0802LS), 30V OptiMOS™ MOSFET (BSZ0905PNS) as a safety switch, small signal MOSFET (BSL606SN) and the EZ-PD™ CCG3PA USB Type-C controller.
This 8W auxiliary SMPS reference design operates over a wide input range and is considered for indoor residential air conditioning applications. It uses the new ICE5AR4770BZSPWM fixed frequency CoolSET™ with a 700V integrated MOSFET in a DIP-7 package.
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
community
Robot
development
community
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
